ℤeynep (@zeynepppnyz) 's Twitter Profile
ℤeynep

@zeynepppnyz

Art Historian

ID: 768102576

calendar_today19-08-2012 19:33:55

39,39K Tweet

1,1K Followers

780 Following

ℝ𝕠𝕔𝕜𝕖𝕥 (@rdbrewer4) 's Twitter Profile Photo

Engineerjng Types: This is the inside of the Swiss cheese motor (linked) on my miter saw. I was adding a Hitachi soft start module because the huge inrush of current when switched on is destroying the motor housing. One of the armature supports fell out. I looked. See it? The

Engineerjng Types: This is the inside of the Swiss cheese motor (linked) on my miter saw. I was adding a Hitachi soft start module because the huge inrush of current when switched on is destroying the motor housing. One of the armature supports fell out. I looked. See it? The
ℝ𝕠𝕔𝕜𝕖𝕥 (@rdbrewer4) 's Twitter Profile Photo

One of the first metal things I painted, and I checked to see if the metal needed scuffing. I read it wrong. So normal handling is knocking off paint chips. I stripped the LED holder and started over. Didn't have green, but these two colors made green. Scuffed and primed.

One of the first metal things I painted, and I checked to see if the metal needed scuffing. I read it wrong. So normal handling is knocking off paint chips. I stripped the LED holder and started over. Didn't have green, but these two colors made green. Scuffed and primed.
ℝ𝕠𝕔𝕜𝕖𝕥 (@rdbrewer4) 's Twitter Profile Photo

In a few days I'll tape off the green LED cups/bases and start on the roses with an anodized base coat, then red. Much later, a clear coat. Might have to touch up the silver reflective surfaces inside the cups. Eventually I'll repaint the bottle holder and feeder, I reckon.

In a few days I'll tape off the green LED  cups/bases and start on the roses with an anodized base coat, then red. Much later, a clear coat. Might have to touch up the silver reflective surfaces inside the cups. Eventually I'll repaint the bottle holder and feeder, I reckon.
ℝ𝕠𝕔𝕜𝕖𝕥 (@rdbrewer4) 's Twitter Profile Photo

I potted a few baby spider plants. Something funny happened. I was tending to one of them, and... you see that pine bark? A piece of it jumped out. A frog had settled in, and I had no idea. Perfect camouflage. I put the Cape Sundews and Venus Flytraps out to enjoy some bugs.

I potted a few baby spider plants. Something funny happened. I was tending to one of them, and... you see that pine bark? A piece of it jumped out. A frog had settled in, and I had no idea. Perfect camouflage.

I put the Cape Sundews and Venus Flytraps out to enjoy some bugs.
ℝ𝕠𝕔𝕜𝕖𝕥 (@rdbrewer4) 's Twitter Profile Photo

Version three* of the hummingbird feeder is coming along slowly. Wiring the tube that connects the red LEDs without creating an eyesore was always going to be difficult. (The red wire will be the power supply inside the tube.) The weatherproof cable bringing power to the feeder

Version three* of the hummingbird feeder is coming along slowly. Wiring the tube that connects the red LEDs without creating an eyesore was always going to be difficult. (The red wire will be the power supply inside the tube.) The weatherproof cable bringing power to the feeder