Nico (@n13d_print) 's Twitter Profile
Nico

@n13d_print

Speed 3D Printing

ID: 1808629666548494336

calendar_today03-07-2024 22:31:50

19 Tweet

13 Followers

24 Following

Nico (@n13d_print) 's Twitter Profile Photo

eSun PLA+ 240c is going well A1 Mini Since yesterday with me and now close to the whole Speed because i want it fast 😁 300-400mm/s 15k Accel

Nico (@n13d_print) 's Twitter Profile Photo

Next Step's for the Sovol Zero to Break the 1000mm/s 100k Accel Barrier and at the same time even quieter for daily settings

Nico (@n13d_print) 's Twitter Profile Photo

Next part of the Sovol Zero remove a lot of weight (only the Extruder Motor is 120g a Sherpa Mini with Moons Motor has 140g in total)

Next part of the <a href="/Sovol3d/">Sovol</a> Zero remove a lot of weight (only the Extruder Motor is 120g  a Sherpa Mini with Moons Motor has 140g in total)
Nico (@n13d_print) 's Twitter Profile Photo

Trident 6WD is Printing fast but the Motors are getting to hot so now Printing sime things for Water Cooling and with the #CHCXL its easy Possible to gut Out up to 65mmΒ³/s

Nico (@n13d_print) 's Twitter Profile Photo

Biiiig Thanks to Philip we are Cooking for The Ultimate #Voron 0 Gantry #CNC Dual MGN7C (in the pic 7H) Custom X Beam to Mount the 2 Rails Custom XY Joints Dual Custom Light Weight Rails (-50% to Stock MGN7

Nico (@n13d_print) 's Twitter Profile Photo

The Bambu Lab A1 Mini i Bought New and had 15h before Teardown now i Swap it to a Klipper Board to see whats Really possible πŸ˜‰

Nico (@n13d_print) 's Twitter Profile Photo

Voron 0 with 1500mm/s At 150k Travel Speed πŸ˜… Infill at 1000mm/s at 75k and all with 50scv need to change small things and fine tune the m4 extruder but getting in the right way

Nico (@n13d_print) 's Twitter Profile Photo

Finally I managed a sub 2 min benchy I never thought it would be the Voron Micron but heyy why not πŸ‘ŒπŸΌ youtu.be/1FYm-hHQEFo?si…

Nico (@n13d_print) 's Twitter Profile Photo

New Toolhead for my Voron Micron now with Bowden for some Extra Acceleration πŸ€«πŸš€ (I wanted to keep the CAN Board so as not to run new cables to the M8P Board) Before with Sherpa Mini 750mm/s 110k max now 750mm/s 250k at 150SCV πŸš€

New Toolhead for my Voron Micron now with Bowden for some Extra Acceleration πŸ€«πŸš€ 

(I wanted to keep the CAN Board so as not to run new cables to the M8P Board)

Before with Sherpa Mini 750mm/s 110k max now 750mm/s 250k at 150SCV πŸš€