Volkmar Lull (@volkmarlull) 's Twitter Profile
Volkmar Lull

@volkmarlull

independent MMA resins producer, resins for acrylic carbon sheets , PUMMA resins for bridge deck coatings, polymer mortars, fast curing resins for waterproofing

ID: 19875114

linkhttp://www.plasti-chemie.de calendar_today01-02-2009 20:32:36

1,1K Tweet

1,1K Takipçi

4,4K Takip Edilen

Volkmar Lull (@volkmarlull) 's Twitter Profile Photo

Plastifloor resins are used to renovate coolers in a short time. The new floor is ready for use only 2 h after sealing. More info: plastifloor.net

Plastifloor resins are used to renovate coolers in a short time. The new floor is ready for use only 2 h after sealing. More info: plastifloor.net
Volkmar Lull (@volkmarlull) 's Twitter Profile Photo

Plastifloor resins are fast curing. Every layer is curing within 1 h. So when substrate is bad, time is short use Plastifloor Resin for your coating project. The new floor is ready for use only 2 h after sealing. plastifloor.net #mmaresin #plastifloor #pmma #reactiveresin

Plastifloor resins are fast curing. Every layer is curing within 1 h. So when substrate is bad, time is short use Plastifloor Resin for your coating project. The new floor is ready for use only 2 h after sealing. plastifloor.net #mmaresin #plastifloor #pmma #reactiveresin
Volkmar Lull (@volkmarlull) 's Twitter Profile Photo

We deliver the fast curing Plastifloor resins in 20,25 kg pails or 180 kg drums by truck, sea container or by airplane . plastifloor.net

We deliver the fast curing Plastifloor resins in 20,25 kg pails or 180 kg drums by truck, sea container or by airplane . plastifloor.net
Volkmar Lull (@volkmarlull) 's Twitter Profile Photo

Fast curing Plastifloor resins had been used to renovate a floor in the food industry within 3 days. The new floor is ready for use only 2 h after sealing. More info: mma-floor.com

Fast curing Plastifloor resins had been used to renovate a floor in the food industry within 3 days. The new floor is ready for use only 2 h after sealing. More info: mma-floor.com
Volkmar Lull (@volkmarlull) 's Twitter Profile Photo

Even when there is slope the water can flow easy to the drains after the Paraffin had been removed from the surface. More info: plastifloor.net

Even when there is slope the water can flow easy to the drains after the Paraffin had been removed from the surface. More info: plastifloor.net
Volkmar Lull (@volkmarlull) 's Twitter Profile Photo

Use Plastifloor 522 + 10% pigment paste to achieve a smooth mat surface for the pharmaceutical industry. plastifloor.net #pmma

Use Plastifloor 522 + 10% pigment paste to achieve a smooth mat surface for the pharmaceutical industry. plastifloor.net #pmma
Volkmar Lull (@volkmarlull) 's Twitter Profile Photo

Plastifloor 522 is our hard sealer for flakes floors. It’s curing within 1 h even at low temp. plastifloor.net #plastifloor #plastichemie #mmaresin #reactiveresin #kunstharzboden

Plastifloor 522 is our hard sealer for flakes floors. It’s curing within 1 h even at low temp. plastifloor.net #plastifloor #plastichemie #mmaresin #reactiveresin #kunstharzboden
Volkmar Lull (@volkmarlull) 's Twitter Profile Photo

Use our profile system, prime it with Plastifloor 332, then mix 2 kg Plastifloor 540/h cove paste with 20 g hardener 50 W, mix for 1 min, add 5kg color quartz 0,6-1,2 mm, pour it into the cove and smooth it with a cove trowel. After curing seal it with Plastifloor 526.

Use our profile system, prime it with Plastifloor 332, then mix 2 kg Plastifloor 540/h cove paste with 20 g hardener 50 W, mix for 1 min, add 5kg color quartz 0,6-1,2 mm, pour it into the cove and smooth it with a cove trowel. After curing seal it with Plastifloor 526.