UHF Satcom ๐Ÿ‡ฌ๐Ÿ‡ง ๐Ÿ“ก ๐Ÿ“ป (@uhf_satcom) 's Twitter Profile
UHF Satcom ๐Ÿ‡ฌ๐Ÿ‡ง ๐Ÿ“ก ๐Ÿ“ป

@uhf_satcom

Monitoring VHF to EHF ๐Ÿ“ก๐Ÿ›ฐ๏ธsince Y2K. Microwaves / CNC / Electronics / Computers / Hacking / InfoSec - Ham Call M0EYT. Politics = instant unfollow + block ๐Ÿ“ปโšก๏ธ

ID: 124244642

linkhttps://uhf-satcom.com calendar_today18-03-2010 19:07:04

20,20K Tweet

19,19K Takipรงi

699 Takip Edilen

GiamMa-based researchers SDR R&D IoT (@giammaiot2) 's Twitter Profile Photo

ats20_ats_ex by goshante github.com/goshante/ats20โ€ฆ Advanced and redesigned firmware for the Si4735 (or Si4732) based ATS-20 receiver. Try the process function. v1.13 (12.03.2024) #SoftwareDefinedRadio #SDR #ArduinoNano #Si4732 #Si4735 #Si473x

ats20_ats_ex by goshante

github.com/goshante/ats20โ€ฆ

Advanced and redesigned firmware for the Si4735 (or Si4732) based ATS-20 receiver. Try the process function. v1.13 (12.03.2024)

#SoftwareDefinedRadio #SDR 
#ArduinoNano #Si4732 #Si4735 #Si473x
UHF Satcom ๐Ÿ‡ฌ๐Ÿ‡ง ๐Ÿ“ก ๐Ÿ“ป (@uhf_satcom) 's Twitter Profile Photo

Fixed the intermittant in my Tosh TV, dry joint on the IF sound demod board. Downside is the OSD has either been turned off or has broken. Micro is OK though and everything works ;-)

Fixed the intermittant in my Tosh TV, dry joint on the IF sound demod board. Downside is the OSD has either been turned off or has broken. Micro is OK though and everything works ;-)
IU1KVL (@albfer6) 's Twitter Profile Photo

A new Satsagen release with improved LibreSDR/ZynqSDR support and some other fixes is available on albfer.com/en/satsagen-doโ€ฆ

A new Satsagen release with improved LibreSDR/ZynqSDR support and some other fixes is available on albfer.com/en/satsagen-doโ€ฆ
BG0AUB (@zhaofen37759626) 's Twitter Profile Photo

Three sets of 10ghz beacons were made for testing. Among them, the network control version can be web-based controlled, can send custom messages, and is powered by POE. The transmission power is not less than 13DBm...

Three sets of 10ghz beacons were made for testing. Among them, the network control version can be web-based controlled, can send custom messages, and is powered by POE. The transmission power is not less than 13DBm...
FreddyV (@freddyvetele) 's Twitter Profile Photo

Hi, I released the November 16 #PicoMEM Firmware. It has a lot of changes and a (long) waited Sound Blaster emulation added (Compatible with some games) Multiple Disk speed increase, covox, ROM/RAM Dump utility and more. github.com/FreddyVRetro/Iโ€ฆ

Steve (@g8gka) 's Twitter Profile Photo

My PMA5-123 10GHz PA is working well. After a couple of minor HW changes and two parameter changes in the DC-bias MCU SW I can now measure 2.5W with 24dB gain. A nice add-on for my homebrew TVTRs. Now to think about a suitable enclosure and putting the second one together. #UKGHz

My PMA5-123 10GHz PA is working well. After a couple of minor HW changes and two parameter changes in the DC-bias MCU SW I can now measure 2.5W with 24dB gain. A nice add-on for my homebrew TVTRs. Now to think about a suitable enclosure and putting the second one together. #UKGHz
UHF Satcom ๐Ÿ‡ฌ๐Ÿ‡ง ๐Ÿ“ก ๐Ÿ“ป (@uhf_satcom) 's Twitter Profile Photo

Very happy to have found this old voltage reg in my boxes of useful stuff, it saved a Sanyo VTC5000 betamax VCR!! I knew it would come in handy one day....

Very happy to have found this old voltage reg in my boxes of useful stuff, it saved a Sanyo VTC5000 betamax VCR!! I knew it would come in handy one day....