850kg too much for the front of the 9520? Carry grading and heard a bit of weight would settle down the bounce. 480/80R50 duals for reference. 20psi in the back and 14 in the front for ride. Transfer load onto hitch at rear.

Been using this app for elevation data to explore drainage ideas but it seems wildly inaccurate. What other apps seem to work better? There used to be good ones that would do grade between points and everything and the data seemed relevant but not so much now?

25mm in Dalyup and the arrival of our first swan 😂

Real concerns only come up if we see Pelicans…..

Would anyone like this? It’s a lay down mat for the JCB to push canola down ahead of the sprayer in the absence of a SP , chucking it out so free to someone who wants it. ⁦Kelvin Hams⁩ has one too i think to get the idea of.

Truth, technology is often baffling, it is said technology is good when you don’t know you are using it.

Bit hard to see but had to clean a fuel tank out that got contaminated with canola pod, used a venturi vacuum from tire store to suck out, used the old engine airfilter to cut down atomised fuel in the air and deposit contaminants in there.

Not as sexy as tile drainage, surface drains getting the job done for now. It fascinates me how if the water is moving even the crop in the bottom of the drain of still ok, but let it pond and its lethal.

Dad’s original tractor bought in 64 after a fresh service and replacement of a radiator hose that had blown, first breakdown i can ever remember, next to the best of them canola 44y94. Same tractor as depicted on mural outside of Dome Esperance.

Any recommendations for a replacement air suspension seat for a truck?

The deepest socket 🤔

One of the blessings of farming where i do is proximity to the lime pit. 60km round trip and hour twenty return. Can cart 8 loads a day at best with a semi; probably not a lot more with breaking up a road train. Prices rising soon so stock piling for this summer. Gypsum/lime 4:1

2017 DR650 for sale, just over 8000km long range tanks, belly plates, bark busters, screen, Good condition. $7k firm located Esperance but if not sold in the next week or so it’s going to Perth for sale. Ohfor28753047

Anyone got an internal peaking auger in a large field bin to get more capacity? Interested to know how to make one work. I’ve got a 110t southern engineering and agriculture unit that i can’t fill the center with my Nyrex.