47GHz qso with Hans PE1CKK over 65km👍👍

Attending Texel fly-in. Camping under the wing!

Today I worked 4 new stations on 6cm eme. Screenshot of my first CW qso with g3ltf. Other qso’s in magic Q65. All credits to g3ltf’s big dish to hear my small signal. 1.8m dish and 35W

Made a new psu this weekend to test some 24GHz twt’s. Results: RW1127, 1W drive 25W output. RW1136, 12mW drive 12W output. I can make more output with the 1127 but it trips on helix current. > 3mA. Somebody know how far you can go on the helix current?

#eme Together with PA7JB i made some sunnoise measurements on 24GHz. 1.8m offset dish f/D 0.8 with dualmode horn feed. Kuhne LNA 12.5dB and DU3T klna 13dB. Working on 25W station.

#eme First layout on 24GHz eme transverter. Short: DU3T lna, RW1127 30W twt, wavelab/PA0MHE transverter and dual mode feed horn. Antenne is 1.8m prodelin offset dish. Probably in spring 2023 first tests!

NASA post! 🧦

Does anyone know what this is? Very loud signal on 1296.735MHz somewhere in the The Hague area. The Netherlands. Receiving in jo22of QTF 250.

#eme Final test with my eme setup! Squeezed 30W out of the twt. Polish wavelab module with pa0mhe addon pcb. Ready for the real test in my 1.8m offset dish. Keep you all posted.

This weekend i made my first 3cm eme qso. Friday first reception of the dl0shf beacon. Today 2 qso’s with big guns. Speaker copy signals from oz1lpr and g4rfr. Thanks guys.

On Kingsday I made another 6 eme qso’s on 3 cm. What a great band. With my small 1.8m dish I have been able to work even smaller stations. Great to hear the echo from the last Q65 tones out of the speaker at change over. This definitely made my day.

Very pleased with my first 24GHz eme contact. 1.8 m offset dish and 30W from RW1127 twt.

Nice present with Xmas. Satrover all-in QO100 transverter now in the shop. No need for internet or computer, drive it with 144 MHz tranceiver. (IC705 or ft818) hamshop.nl/satrover-qo100…

Today I made mij first eme contact on 9cm. Never tested the transverter before, at my first ever transmission I had echo in the waterfall. QSO was a 3 min event.

My latest project, now available! I have produced a limited batch of 50 pcs. e-mail in the video! youtu.be/JQNoFGzKpuw

I had some comments on the audio of my video. Now it is solved! youtu.be/ZDBIMjCUKtY?si…

Very happy with my first PA-DU qso on 9cm. This was the first 9cm qso from DU ever. DU3T is now fresh meat!

24GHz eme beacon this morning. DL0SHF in high power mode.

#QO100 After a successful production run of the Satrover last year, I started a new batch of Satrovers. Due to worldwide component shortage I was not able to do this earlier. As far as I can see, the first units are available end of July. youtube.com/watch?v=ZDBIMj…

Had some fun with the Satrover on ft8. Remarkable good reception with the bare lnb. Made a mirrored helix for tx.