Luděk H (@h_ludek) 's Twitter Profile
Luděk H

@h_ludek

1100
shutterstock.com/cs/g/Ludek+H

ID: 1233079141941022722

linkhttps://12in.cz calendar_today27-02-2020 17:19:41

300 Tweet

32 Takipçi

89 Takip Edilen

Luděk H (@h_ludek) 's Twitter Profile Photo

New easy DIY task rising from the horizon when LSA1 comes. Measuring+inspection of tool in the spindle. I like to use Mitutoyo Canada and hope that LWD 7.5x objective do its job well, when usage this objective for full frame photos was dissapointing. #ACCUD #DIY And result is 42.

New easy DIY task rising from the horizon when LSA1 comes. Measuring+inspection of tool in the spindle. I like to use <a href="/MitutoyoCanada/">Mitutoyo Canada</a> and hope that LWD 7.5x objective do its job well, when usage this objective for full frame photos was dissapointing. #ACCUD #DIY
And result is 42.
Luděk H (@h_ludek) 's Twitter Profile Photo

Going on to the next step, preparation of the rest pieces for precize 12x20" sheet #ilford film cutter to two pieces with 12x12" and 8x12" dimensions.

Going on to the next step, preparation of the rest pieces for precize 12x20" sheet #ilford film cutter to two pieces with 12x12" and 8x12" dimensions.
Luděk H (@h_ludek) 's Twitter Profile Photo

I am just amazed how fast and accurate is Helicon Focus in version 8. Video show dropping of 336 TIFF files, 172 MB (30 Mpx) each file and it tooks not even whole minute to get result. #heliconfocus #tick #kliste #microphotography #photomicrography

Luděk H (@h_ludek) 's Twitter Profile Photo

Few years from shooting i completed final stacked and stitched photo of tick. Taken with 20x LWD Mitutoyo. Full resolution is 257Mpx. 12in.cz/fotografie/obr… #mitutoyo #tick #kliste #microphotography

Few years from shooting i completed final stacked and stitched photo of tick. Taken with 20x LWD Mitutoyo. Full resolution is 257Mpx.
12in.cz/fotografie/obr…
#mitutoyo #tick #kliste #microphotography
Luděk H (@h_ludek) 's Twitter Profile Photo

I am getting to know using of #Pico This night just simple test on StandBy power supply from TDK-Lambda Americas power source for 600W LED. #pimoroni #vscode #c

Luděk H (@h_ludek) 's Twitter Profile Photo

As i don't have MMU or toolchanger and i would like to print my own bellows, i tested idea to prepare PLA spacers that will be added at pauses to the printed TPU 95A part. Prooved and it works. #FreeCAD #3dprinted #bellows

As i don't have MMU or toolchanger and i would like to print my own bellows, i tested idea to prepare PLA spacers that will be added at pauses to the printed TPU 95A part.
Prooved and it works. #FreeCAD #3dprinted #bellows
Luděk H (@h_ludek) 's Twitter Profile Photo

Completed XoL toolhead (used PET-CF and PPA-CF printed parts and Phaetus Dragon Voron hotend with SC phaetus noozle) and so it is ready for test. #xol #toolhead #3dprinted #phaetus