We took part of the first Conformity Assessment Body (CAB), a decentralized authority for attestation of #OpenSourceHardware (#OSH) according to DIN SPEC 3105. The CAB was organized by OSE Germany, thanks for the invite! v.gd/1Rjkah

Wind datalogger prototyping: For measuring wind speed and direction we use the wireless WS80 from Fine Offset Electronics. Finally we receive a signal and thanks to the folks of rtl_433 and Christian we are able to decode the payload! #arduino #esp32 #windenergy #opensouce

It seems so easy building an open souce wind turbine when asking #chatGPT ... too easy to be honest

Last weekend we met some of the other projects who are currently funded by the Prototype Fund Hardware. Thanks for sharing and organizing!

We finished our securitybox prototype! The box will take care of #windkit and continuously check the rotational speed of the rotor. If at high winds a certain threshold is reached the securitybox will short circuit the alternator and therefore slow down the rotor for safety!

Hey, auf dem Prototype Fund Hardware Blog ist heute ein Interview über unser Projekt erschienen 💥 Wir sprachen mit Maximilian Voigt 🤖 über die Potenziale von Kleinwindkraft, Reparierbarkeit und Challenges bei der Entwicklung aber lest lieber selbst, viel Spaß! 🤓 hardware.prototypefund.de/energie-selbst…

Yeah, we will be part of the #FOH23 Forum Open:Hardware hardware.forum-open.de , have a look at the schedule (only in german) !

thanks for the lovely illustration @ermelchen 🤗

there will be a physically compiled version of windkit, down from the repo, right into the center of berlin. bring your lightbulps, openhardware will power it! #openhardware #gitclone #FOH23 #PowerRangers #renewables #powertothepeople #WorkinProgress

It was a lot of fun to get to know the community and make open hardware more visible. #FOH23 was a small glimpse into the future, let's stay tuned to make it a reality 💫 Thanks for having us and for organizing this event Open Knowledge Foundation Deutschland 🤗 #opensourcehardware #righttorepair

Why the hell do people always attach their homemade wind turbines to cars? Instead of driving around and wasting petrol, use a data logger to find out more about the turbine's performance!

🎧 @netzbasteln interviewed us at the Open Hardware Forum 🥰 Listen to the episode at Deutschlandfunk Nova v.gd/dlfosh . Hear us from minute 10! 🎧 (German only)

Yeah our datalogger demo dashboard is online 😍 This is a first proof of concept of the datalogger receiving 'important' 😝 weather data from our #ecowitt WS80 via RF 868 and sending it via MQTT to the dashboard! Have a look here: v.gd/dashboard

Unser erster Prototyp ist endlich fertig und möchte ausgiebig getestet werden. Mit deiner Hilfe wollen wir das WINDKIT aufs Testfeld bringen! Dafür haben wir eine Crowdfundingkampagne bei Startnext gestartet. Wir freuen uns sehr um jede Unterstützung! startnext.com/windkit-testfe…

The wind took us... Somewhere in the fediverse... 🌀 You can catch us here v.gd/2LabAj