Desde Valencia, CLECEM nos cuenta la modificación de monolitos con aptámeros y el uso de la tecnología de impresión 3D para el desarrollo de nuevos materiales. 😀😀

Our PhD students have presented in the National Network for sustainable sample preparation (Red Nacional de Preparación de Muestras) works about aptamer@monolith (Natalia Piqueras) and 3D-printed@MOF (Miguel Ángel Martínez Briones) devices

La representación de CLECEM group quiere darle las gracias a Verónica Pino y Javier Hdez Borges MAT4LL Research Group AChem Research Group por la excelente organización, y a Marisol Cárdenas de AS2P Research gr.. Ha sido un auténtico placer disfrutar de este final de workshop Red Nacional de Preparación de Muestras. Nos vemos pronto 😉👌

Oportunidad de Empleo (Tesis Doctoral) – Se buscan candidat@s interesad@s en solicitar una ayuda para contratación de personal investigador predoctoral dentro del programa Santiago Grisolia (UV). Perfil: Grado cursado fuera de la UE con posterioridad al 1 de enero de 2020.

We developed an Aptamer-functionalized monolith on paper for selective lysozyme extraction in foods via TFME. Applied to egg-free & egg-based foods ✅Low-cost, reusable, and highly sensitive #FoodAnalysis #AnalyticalChemistry Work under EuChemS-DAC Sample Preparation Study Group doi.org/10.1016/j.aca.…

Thrilled to share the collaboration of Enrique Carrasco and Paula Molina with manuel miró at FI-TRACE Group. Spent an amazing week conducting cutting-edge research together. Thanks for the warm welcome, as always! #ResearchCollaboration

🧪 3D-printed sensor containing a terbium-based MOF enables low-cost, solid-state fluorescence detection of tetracyclines in seawater & milk—no instrument mods needed! LOD: 0.5–1.8 µg/L. Cost: 1.60 €/unit. 🔗 doi.org/10.1007/s00604… #3Dprinting #Sensors #MOFs

Innoclecem participa en el congreso de innovación docente de la #SEQA SEQA

A week ago our CLECEM group held the 3rd workshop Advances in Sample Treatment Techniques and the 2nd workshop Advanced Materials in Low-Cost Platforms at the Faculty of Chemistry. We thank all the speakers and listeners for their collaboration and support.

We started the Workshop with the presentation of Antonio Martín Esteban talking about the use of NADES. We continued with the presentation of Soledad Muniategui Lorenzo talking about microplastics in waters and ended with Roger Peró Gascón talking about mycotoxins in blood.

After the coffee break we continued with the presentation of Toni Iborra talking about different 3D printing technologies. And finally we ended the afternoon with Neus Crespí Sánchez, whose presentation was about tailored MOF-derived materials.

The second day began with Francisco Pena Pereira's presentation on low cost platforms. We continued with Miguel Moreno and Victor M. Gonzalez talking about aptamers, and ended the group with Elena Aznar whose presentation was about gated materials.

Finally, after the coffee break, we ended the Workshop with presentations by Ester Vázquez explaining hybrid hydrogels, and Rafael Gavara whose presentation explained antimicrobial packaging systems. Thanks again to the speakers for their presentations and to the attendees.

Our last article, published in Analytica Chimica Acta, presents a 3D-printed rotating disk with MOF-coated chains for efficient extraction of viologen herbicides from rice, offering cleaner and faster analysis than conventional methods. doi.org/10.1016/j.aca.…

We are excited to take part in Euroanalysis XXII in Barcelona! The CLECEM group (CLECEM ) joins the international analytical chemistry community for a week of science, networking, and collaboration. #Euroanalysis2025 #CLECEM #ScientificCommunity #AnalyticalChemistry

We are proud to share our advances in sample preparation at EUROANALYSIS 2025 Barcelona through the oral presentation “Sorbent preparation using eco-friendly and waste-based supports: a step forward in sample preparation” delivered by Héctor Martínez #Euroanalysis2025 #AnalyticalChemistry

Our student Miguel Ángel Martínez Briones has presented a poster entitled “Development of 3D-printed extraction devices modified with metal-organic frameworks for the analysis of marine toxins” at EUROANALYSIS 2025 Barcelona #Euroanalysis2025 #AnalyticalChemistry #Sustainability

Our member Enrique Carrasco presented “3D PRINTING IN ANALYTICAL CHEMISTRY: REVOLUTIONIZING SAMPLE PREPARATION AND SENSORS” at EUROANALYSIS 2025 Barcelona showcasing our contribution to 3D printing innovation in analytical chemistry #Euroanalysis2025 #Innovation #Sustainability

👨‍🏫 Prof. Casado-Carmona (FA23) delivered an oral presentation: “Enhancing membrane-based pipette tip extraction with 3D printing” 🔬 A collaborative work with AS2P Research gr. and CLECEM.

Happy to share our lastest work (doi.org/10.1016/j.aca.…), where we prepared aptamer sorbents in polypropylene tubes for BPA extraction