Good morning People!!!

1.Fireplace assembling. It is necessary the following conditions to be kept in order to ensure a safe and correct work of the fireplace:

The fireplace should be installed in rooms with sufficient air flow which is required for the combustion.

Not every fireplace could be connected 2 any chimney.Before assembling the fireplace check if the static pressure and the chimney dimensions

If the fireplace does not conform to the chimney, it will lead to a lower burning rate and polluting the glass with soot.

The chimney should be high enough (not less than 5 meters). Only one more appliance is allowed to be connected to the same chimney.

If the chimney is too high (the draught exceeding 35 Pa) then it is necessary to mount a supplementary valve to diminish the draught

The floor where the fireplace is placed should be flat and horizontal, made of non-combustible materials (mosaic, marble, terracotta, etc.)

If the floor is not heat resistant (carpets, linoleums) a stable, non-combustible plate should be used, made of steel,glass or stone plates.

If a heat resistant plate is used, it should come out: 50 cm in front and 30 cm from both sides,measured from the fire door of the fireplace

The joints between the chimney pipes and the socket should be tight.

Καλή Χρονιά από την LINE GROUP! - eepurl.com/tyTI1

Happy New Year from LINE GROUP!! - eepurl.com/tBv_n

Σας προσκαλούμε στην έκθεση Energy Tech, από 21/02 - 24/02/2013. Θα μας βρείτε στο περίπτερο 10, stand 1.

We invite you in EnergyTech Trade Fair, Thessaloniki-Greece. You will find us in Hall 10, stand 1.