CNX Software (@cnxsoft) 's Twitter Profile
CNX Software

@cnxsoft

News about Linux and Android, ARM & RISC-V processors, open-source hardware, embedded systems, single board computers, Arduino, Raspberry Pi and more

ID: 114751985

linkhttp://www.cnx-software.com calendar_today16-02-2010 14:01:18

14,14K Tweet

17,17K Followers

968 Following

CNX Software (@cnxsoft) 's Twitter Profile Photo

.STMicroelectronics LSM6DSV320X is a compact AI-enabled inertial measurement unit (IMU) that integrates a 3-axis digital gyroscope, a 3-axis low-g accelerometer (±16g), and a 3-axis high-g accelerometer (±320g) in a tiny 3 x 2.5mm package. cnx-software.com/2025/05/28/st-… The chip includes a

.<a href="/ST_World/">STMicroelectronics</a> LSM6DSV320X is a compact AI-enabled inertial measurement unit (IMU) that integrates a 3-axis digital gyroscope, a 3-axis low-g accelerometer (±16g), and a 3-axis high-g accelerometer (±320g) in a tiny 3 x 2.5mm package.
cnx-software.com/2025/05/28/st-…

The chip includes a
CNX Software (@cnxsoft) 's Twitter Profile Photo

.Radxa ROCK 4D is a credit card-sized Rockchip RK3576 SBC with a form factor similar to the Raspberry Pi 3. cnx-software.com/2025/05/28/rad… The RK3576 is a relatively powerful 2.2 GHz octa-core Arm Cortex-A72/A53 SoC with a 6 TOPS AI accelerator, and the ROCK 4D ships with up

.<a href="/RadxaComputer/">Radxa</a> ROCK 4D is a credit card-sized Rockchip RK3576 SBC with a form factor similar to the Raspberry Pi 3. 
cnx-software.com/2025/05/28/rad…

The RK3576 is a relatively powerful 2.2 GHz octa-core Arm Cortex-A72/A53 SoC with a 6 TOPS AI accelerator, and the ROCK 4D ships with up
CNX Software (@cnxsoft) 's Twitter Profile Photo

Sponsored: Revopoint 3D Trackit is a high-end 3D scanner that works without markers. cnx-software.com/2025/05/28/rev… The scanner offers two scanning modes with a 30-line cross blue laser mode for quick scans and a single-line blue laser mode for capturing narrow, hard-to-reach areas.

Sponsored: <a href="/Revopoint3d/">Revopoint 3D</a> Trackit is a high-end 3D scanner that works without markers.
cnx-software.com/2025/05/28/rev…

The scanner offers two scanning modes with a 30-line cross blue laser mode for quick scans and a single-line blue laser mode for capturing narrow, hard-to-reach areas.
CNX Software (@cnxsoft) 's Twitter Profile Photo

.Seeed Studio Vision AI camera supports the low-code/no-code SenseCraft platform for easy deployment of AI models. cnx-software.com/2025/05/29/xia… The hardware combines a Grove Vision AI Module V2 based on WiseEye2 HX6538 Cortex-M55/Ethos-U55 AI MCU, an ESP32-C3 module, and an OV5647

.<a href="/seeedstudio/">Seeed Studio</a> Vision AI camera supports the low-code/no-code SenseCraft platform for easy deployment of AI models.
cnx-software.com/2025/05/29/xia…

The hardware combines a Grove Vision AI Module V2 based on WiseEye2 HX6538 Cortex-M55/Ethos-U55 AI MCU, an ESP32-C3 module, and an OV5647
CNX Software (@cnxsoft) 's Twitter Profile Photo

.NXP MCX W72x is a new family of multiprotocol wireless Arm Cortex-M33 MCUs with support for Bluetooth 6.0 Channel Sounding. cnx-software.com/2025/05/29/nxp… The microcontrollers also feature an 802.15.14 radio for Zigbee, Thread, and Matter support, an Edgelock Secure Enclave for

.<a href="/NXP/">NXP</a> MCX W72x is a new family of multiprotocol wireless Arm Cortex-M33 MCUs with support for Bluetooth 6.0 Channel Sounding.
cnx-software.com/2025/05/29/nxp…

The microcontrollers also feature an 802.15.14 radio for Zigbee, Thread, and Matter support, an Edgelock Secure Enclave for
CNX Software (@cnxsoft) 's Twitter Profile Photo

OBJEX Labs Link S3LW is an ultra-low-power ESP32-S3 LoRaWAN board that can also take up to 100W DC input. cnx-software.com/2025/05/29/obj… The board is compliant with the USB PD standard, features two 28-pin headers and a STEMMA I2C connector for expansion, as well as a built-in

OBJEX Labs Link S3LW is an ultra-low-power ESP32-S3 LoRaWAN board that can also take up to 100W DC input.
cnx-software.com/2025/05/29/obj…

The board is compliant with the USB PD standard, features two 28-pin headers and a STEMMA I2C connector for expansion, as well as a built-in
CNX Software (@cnxsoft) 's Twitter Profile Photo

.xMEMS µCooling fan-on-a-chip adds solid-state active cooling to SSDs for laptops and data centers. cnx-software.com/2025/05/29/xme…

.<a href="/xMEMSLabs/">xMEMS</a>  µCooling fan-on-a-chip adds solid-state active cooling to SSDs for laptops and data centers.
cnx-software.com/2025/05/29/xme…
CNX Software (@cnxsoft) 's Twitter Profile Photo

.Ambiq Apollo330 Plus sub-threshold Arm Cortex-M55 Edge AI MCU family is offered with optional Bluetooth 5.4 LE and 802.15.4 radios. cnx-software.com/2025/05/30/amb… The general-purpose ultra-low-power Apollo330 Plus is suitable for wearables and medical devices, the Apollo330B Plus

.<a href="/Ambiq_AI/">Ambiq</a> Apollo330 Plus sub-threshold Arm Cortex-M55 Edge AI MCU family is offered with optional Bluetooth 5.4 LE and 802.15.4 radios.
cnx-software.com/2025/05/30/amb…

The general-purpose ultra-low-power Apollo330 Plus is suitable for wearables and medical devices, the Apollo330B Plus
CNX Software (@cnxsoft) 's Twitter Profile Photo

.Terasic Inc. Atum A3 Nano is a development board based on Intel Altera Agilex 3 FPGA with 135K logic elements. cnx-software.com/2025/05/30/atu… The compact (85 x 70 mm) board is equipped with 64 MB SDRAM, Gigabit Ethernet, HDMI output, a microSD card slot, and an onboard

.<a href="/Terasic_FPGA/">Terasic Inc.</a> Atum A3 Nano is a development board based on Intel <a href="/AlteraFPGA_/">Altera</a> Agilex 3 FPGA with 135K logic elements.
cnx-software.com/2025/05/30/atu…

The compact (85 x 70 mm) board is equipped with 64 MB SDRAM, Gigabit Ethernet, HDMI output, a microSD card slot, and an onboard
CNX Software (@cnxsoft) 's Twitter Profile Photo

.DFRobot Edge101 is an ESP32-based industrial IoT controller with isolated RS485 and CAN Bus interfaces. cnx-software.com/2025/05/30/dfr… The device also features Ethernet, 2.4 GHz WiFi, and Bluetooth connectivity, and as an option for a 4G/NB-IoT mPCIe module. It takes 9V to 26V DC

.<a href="/dfrobotcn/">DFRobot</a> Edge101 is an ESP32-based industrial IoT controller with isolated RS485 and CAN Bus interfaces.
cnx-software.com/2025/05/30/dfr…

The device also features Ethernet, 2.4 GHz WiFi, and Bluetooth connectivity, and as an option for a 4G/NB-IoT mPCIe module. It takes 9V to 26V DC
CNX Software (@cnxsoft) 's Twitter Profile Photo

.Unexpected Maker SQUiXL is a battery-powered ESP32-S3 development kit with a 4-inch touchscreen display and an optional dock cnx-software.com/2025/05/30/bat… It ships with 8MB PSRAM and a 16MB SPI flash, features a microSD card, an amplifier with speaker connector, a haptic driver and

.<a href="/unexpectedmaker/">Unexpected Maker</a> SQUiXL is a battery-powered ESP32-S3 development kit with a 4-inch touchscreen display and an optional dock
cnx-software.com/2025/05/30/bat…

It ships with 8MB PSRAM and a 16MB SPI flash, features a microSD card, an amplifier with speaker connector, a haptic driver and
CNX Software (@cnxsoft) 's Twitter Profile Photo

.Seeed Studio Wio Tracker L1 Pro is another Meshtastic handset for off-grid messaging based on Nordic Semiconductor nRF52840 BLE MCU and Semtech Corporation SX1262 LoRa transceiver. cnx-software.com/2025/05/31/wio… It also comes with a small 1.3-inch OLED, a GPS module to share coordinates, a buzzer,

.<a href="/seeedstudio/">Seeed Studio</a> Wio Tracker L1 Pro is another Meshtastic handset for off-grid messaging based on <a href="/NordicTweets/">Nordic Semiconductor</a> nRF52840 BLE MCU and <a href="/SemtechCorp/">Semtech Corporation</a> SX1262 LoRa transceiver.
cnx-software.com/2025/05/31/wio…

It also comes with a small 1.3-inch OLED, a GPS module to share coordinates, a buzzer,
CNX Software (@cnxsoft) 's Twitter Profile Photo

ESP32-P4 development board with a 3.4-inch or 4-inch round touchscreen display. cnx-software.com/2025/06/01/esp… The Waveshare Electronics ESP32-P4-WIFI6-Touch-LCD-3.4C and ESP32-P4-WIFI6-Touch-LCD-4C also integrate two microphones with echo cancellation for voice AI applications, an ESP32-C6

ESP32-P4 development board with a 3.4-inch or 4-inch round touchscreen display.
cnx-software.com/2025/06/01/esp…

The <a href="/waveshare00/">Waveshare Electronics</a> ESP32-P4-WIFI6-Touch-LCD-3.4C and ESP32-P4-WIFI6-Touch-LCD-4C also integrate two microphones with echo cancellation for voice AI applications, an ESP32-C6
CNX Software (@cnxsoft) 's Twitter Profile Photo

.@Bestechnic BES2700YP is an Arm Cortex-M55 Bluetooth 5.3 Audio SoC used in earbuds, headphones, and portable speakers. cnx-software.com/2025/06/02/bes… It's based on the BES2700 series with a combination of Cortex-M55 and STAR-MC1 cores that also include variants with MIPI DSI and a

.@Bestechnic BES2700YP is an Arm Cortex-M55 Bluetooth 5.3 Audio SoC used in earbuds, headphones, and portable speakers.
cnx-software.com/2025/06/02/bes…

It's based on the BES2700 series with a combination of Cortex-M55 and STAR-MC1 cores that also include variants with MIPI DSI and a
CNX Software (@cnxsoft) 's Twitter Profile Photo

ESP32-P4 Smart 86 Box with a 4-inch touchscreen display. cnx-software.com/2025/06/02/esp… Two models are available: a 14mm thin one with a 28-pin GPIO header and MIPI CSI camera connector, and a thicker one with Ethernet, RS485, two AC/DC relays, and 6V to 30V DC input. #smarthome #IIoT

ESP32-P4 Smart 86 Box with a 4-inch touchscreen display.
cnx-software.com/2025/06/02/esp…

Two models are available: a 14mm thin one with a 28-pin GPIO header and MIPI CSI camera connector, and a thicker one with Ethernet, RS485, two AC/DC relays, and 6V to 30V DC input. #smarthome #IIoT
CNX Software (@cnxsoft) 's Twitter Profile Photo

.MOKOSMART LW005-MP is a Smart plug and power meter with LoRaWAN and Bluetooth connectivity. cnx-software.com/2025/06/03/mok… It operates in the 100V/230V range up to 16A and is available with plugs compatible with US, UK, EU, and FR standards. It can be controlled/managed through

.<a href="/mokosmart/">MOKOSMART</a> LW005-MP is a Smart plug and power meter with LoRaWAN and Bluetooth connectivity.
cnx-software.com/2025/06/03/mok…

It operates in the 100V/230V range up to 16A and is available with plugs compatible with US, UK, EU, and FR standards.

It can be controlled/managed through
CNX Software (@cnxsoft) 's Twitter Profile Photo

Liberux NEXX is a powerful Linux smartphone powered by a Rockchip RK3588S CPU and equipped with a 6.34-inch OLED, 32GB RAM, 512GB eMMC flash, and a Snapdragon X62 5G cellular modem. cnx-software.com/2025/06/03/lib… It runs a Debian 13-based OS with Gnome Mobile Shell, and will be

Liberux  NEXX is a powerful Linux smartphone powered by a Rockchip RK3588S CPU and equipped with a 6.34-inch OLED, 32GB RAM, 512GB eMMC flash, and a <a href="/Snapdragon/">Snapdragon</a> X62 5G cellular modem.
cnx-software.com/2025/06/03/lib…

It runs a Debian 13-based OS with Gnome Mobile Shell, and will be
CNX Software (@cnxsoft) 's Twitter Profile Photo

.Vecow Co., Ltd. PBC-2000 is a compact, fanless embedded PC powered by an Intel Atom x7211RE Amston Lake CPU. cnx-software.com/2025/06/03/vec… Designed to operate in the industrial range, the embedded system features up to 16GB RAM, supports SATA or M.2 NVMe storage, offers HDMI video output,

.<a href="/VecowCo/">Vecow Co., Ltd.</a> PBC-2000 is a compact, fanless embedded PC powered by an Intel Atom x7211RE Amston Lake CPU.
cnx-software.com/2025/06/03/vec…

Designed to operate in the industrial range, the embedded system features up to 16GB RAM, supports SATA or M.2 NVMe storage, offers HDMI video output,